Calder Engineered Natural Oak Brushed and Oiled 180mm x 15/4mm Wood Flooring

Calder Engineered Natural Oak Brushed and Oiled 180mm x 15/4mm Wood Flooring

The Calder Engineered Natural Oak flooring features a natural oak tone with a brushed and oiled finish that enhances the grain and adds a lightly textured feel.

Each board measures 180mm (18cm) in width and 15mm in thickness, including a 4mm solid oak wear layer. This allows sanding and refinishing up to three times, although this is typically not required within the first 10–15 years.

Engineered construction helps manage changes in temperature and humidity, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms and works with water-based underfloor heating.

• Finish: Brushed and oiled, enhancing the grain but not fully resistant to spillages
• Installation: Tongue and groove boards for glued installation
• Grading: Mixed grade oak with natural knots and variation

Typically installed as a floating floor with a 3mm underlay. A 4mm compressed rubber underlay is suitable with underfloor heating.

As this is an oiled finish, care should be taken with spillages. Starter boards may be included.

Allow 10% extra for wastage and 5% for grading