We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Caledonian Engineered Moray Smoked Oak Brushed and Oiled 190mm x 20/6mm Wood Flooring
Product Code: Caledonian Moray Smoked Oak
£175.50m² inc. VAT
£83.99
m² inc. VAT£83.99㎡
inc. VAT
SKU
Caledonian Moray Smoked Oak
£175.50m² inc. VAT
£83.99
m² inc. VAT- Buy over 30m² for £83.69m² and save 0%
- Buy over 60m² for £83.39m² and save 1%
- Buy over 90m² for £83.09m² and save 1%
- Buy over 120m² for £82.79m² and save 1%
- Buy over 150m² for £82.49m² and save 2%
Caledonian Engineered Moray Smoked Oak Brushed and Oiled 190mm x 20/6mm Wood Flooring
A fantastic Coffee Oak engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
An oiled finish is not impermeable and may not be suitable for spillages. Each pack may contain starter boards to allow you to stagger your layout.
A fantastic Coffee Oak engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
An oiled finish is not impermeable and may not be suitable for spillages. Each pack may contain starter boards to allow you to stagger your layout.
£175.50m² inc. VAT
£83.99
m² inc. VAT| SKU | Caledonian Moray Smoked Oak |
|---|---|
| Finish | Brushed & Oiled |
| Wood Species | Oak |
| Veneer | 6mm |
| Grade | Mixed |
| Thickness | 20mm |
| Wear Layer | 6mm |
| width | 190mm |
| Width Category | WIDE (151mm-200mm) |
| Installation Method | Tongue & Groove |
| Length | 1900mm |
| Range | Caledonian |
Write Your Own Review
Customer Questions