Cressington Engineered Acacia Walnut Lacquered Click Lok 121mm x 10/2.5mm Wood Flooring

A fantastic Coffee Walnut engineered wood flooring. Each individual board is 121mm (12.1cm), the overall thickness of the plank is 10mm (1cm), including a top 2.5mm layer of Walnut veneer. The 2.5mm wear layer enables you to sand down and refinish the surface once. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Walnut is mixed, meaning it will contain some knots as is typical with Walnut products.

This engineered Walnut would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.

Each pack may contain starter boards to allow you to stagger your layout.