**** END OF LINE / JOB LOT **** Cressington Engineered Natural Oak Brushed and Lacquered 150mm x 18/4mm Wood Flooring (17 PACKS / 24.48m² / £685.2)
Was
£65.49m²
Save £37.50m²
£27.99
m²Prices Include VAT
£27.99㎡
inc. VATWas
£65.49m²
Save £37.50m²
£27.99
m²Prices Include VAT
**** END OF LINE / JOB LOT ****
**** 17 PACKS / 24.48m² / £685.2 ****
**** A SAVING OF £195.84 OFF OUR PREVIOUS SELLING PRICE ****
**** NO RETURNS ACCEPTED ****
The Cressington Engineered Natural Oak flooring has a natural oak appearance, with a brushed and lacquered finish that highlights the grain while adding a protective surface layer.
Each board measures 150mm (15cm) in width, which can help create a more open and spacious look, while the 18mm thickness includes a 4mm solid oak wear layer. This wear layer allows the floor to be sanded and refinished up to three times, although this is typically not required for the first 10–15 years in most domestic environments.
The engineered construction helps reduce movement caused by changes in temperature and humidity, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms. This flooring can also be used with water-based underfloor heating systems.
- Finish: Brushed and lacquered, where the surface is lightly textured to highlight the natural grain and sealed with a lacquer for added protection against everyday wear
- Construction: Engineered design to improve stability in changing conditions
- Installation: Tongue and groove boards, designed to be glued together and typically fitted as a floating floor
- Grading: Mixed grade oak, so natural knots and variation will be visible
This flooring is typically installed as a floating floor, with an underlay laid beneath the boards. This helps protect against minor subfloor moisture while also improving sound insulation and heat retention. A 4mm compressed rubber underlay is suitable when installing over water-based underfloor heating.
Boards are supplied in mixed lengths.
When ordering, allow 10% extra for wastage and cut-offs, plus an additional 5% to account for natural grading variation.
**** END OF LINE / JOB LOT ****
**** 17 PACKS / 24.48m² / £685.2 ****
**** A SAVING OF £195.84 OFF OUR PREVIOUS SELLING PRICE ****
**** NO RETURNS ACCEPTED ****
Was
£65.49m²
Save £37.50m²
£27.99
m²Prices Include VAT
| Product Code | 150185BL1 END OF LINE |
|---|---|
| Finish | Brushed & Lacquered |
| Wood Species | Oak |
| Veneer | 4mm |
| Grade | Mixed |
| Thickness | 18mm |
| Wear Layer | 4mm |
| Width | 150mm |
| Width Category | STANDARD (101mm-150mm) |
| Installation Method | Tongue & Groove |
| Length | 400mm-1200mm Mixed Length |
| Range | Cressington |
| Pack Coverage | 1 pack covers 24.480 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Each board has a 4mm layer of wood veneer that enables you to sand down and refinish the surface up to three times.
- The flooring has been finished with a brush to create a textured feel.
- Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
- Each board is manufactured with a tongue and groove profile, so each board can simply be glued together.
- This engineered oak is typically installed as a floating floor with a 5mm underlay on the subfloor, providing protection from dampness and serving as a sound barrier and insulator.
- This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
- Each pack contains boards of mixed lengths, offering a unique and dynamic installation pattern for a beautiful, natural-looking floor.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
