Edmonton Solid Grey Oak Brushed & Lacquered 203mm x 17.5mm Wood Flooring
The Edmonton Solid Grey Oak flooring features cooler grey tones with a brushed surface and lacquered finish, enhancing the grain while adding protection.
This is a finger jointed solid oak floor, with boards made from smaller oak sections joined together to create consistent 1800mm lengths and a uniform layout.
Each board measures 203mm (20.3cm) wide and 17.5mm thick, offering a solid hardwood construction that can be sanded and refinished multiple times.
Finish: Brushed and lacquered for texture and durability
Construction: Finger jointed solid oak boards for consistent sizing
Installation: Designed to be bonded directly to the subfloor
Grading: Mixed grade oak with natural variation
Supplied in fixed 1800mm lengths, with starter boards included in some packs.
Not suitable for underfloor heating or bathrooms. Best used in rooms with stable conditions.
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
The flooring has been finished with a brush to create a textured feel.
Each pack may contain starter boards to allow you to stagger your layout.
This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
This product uses a tongue and groove system, typically installed by gluing the planks together and fixing them to the sub-floor with the glue down method.
Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
You’ll need basic DIY tools like a saw, tape measure, spacers, and mallet, plus specialist tools such as a tapping block and pull bar for a precise fit.
What tools do I need to install wood flooring?
What tools do I need to install wood flooring?
You’ll need basic DIY tools like a saw, tape measure, spacers, and mallet, plus specialist tools such as a tapping block and pull bar for a precise fit.