Edmonton Solid Smoked Grey Oak Brushed & Oiled 150mm x 18mm Wood Flooring
Was
£88.49m²
Save £35.50m²
£52.99
m²£76.31 per pack
Prices Include VAT
£52.99㎡
inc. VAT
Product Code
150SMG1
Was
£88.49m²
Save £35.50m²
£52.99
m²£76.31 per pack
Prices Include VAT
Product Details
Product Code: 150SMG1
Edmonton Solid Smoked Grey Oak Brushed & Oiled 150mm x 18mm Wood Flooring
The Edmonton Solid Smoked Grey Oak flooring features a blend of smoked and grey tones, with a brushed and oiled finish that enhances the natural grain and texture.
Each board measures 105mm (10.5cm) in width and 18mm in thickness, offering a solid oak construction that can be sanded and refinished multiple times over its lifespan.
Supplied in mixed lengths between 300mm and 1200mm, helping to create a natural and varied appearance.
As this is an oiled finish, care should be taken in spill-prone areas. Not suitable for underfloor heating or bathrooms.
Allow 10% extra for wastage and 5% for grading.
The Edmonton Solid Smoked Grey Oak flooring features a blend of smoked and grey tones, with a brushed and oiled finish that enhances the natural grain and texture.
Each board measures 105mm (10.5cm) in width and 18mm in thickness, offering a solid oak construction that can be sanded and refinished multiple times over its lifespan.
- Finish: Brushed and oiled, enhancing the grain. Not fully resistant to spillages
- Construction: Solid oak boards for a traditional hardwood floor
- Installation: Designed to be bonded directly to the subfloor
- Grading: Mixed grade oak with natural knots and variation
Supplied in mixed lengths between 300mm and 1200mm, helping to create a natural and varied appearance.
As this is an oiled finish, care should be taken in spill-prone areas. Not suitable for underfloor heating or bathrooms.
Allow 10% extra for wastage and 5% for grading.
Was
£88.49m²
Save £35.50m²
£52.99
m²£76.31 per pack
Prices Include VAT
| Product Code | 150SMG1 |
|---|---|
| Finish | Brushed & Oiled |
| Wood Species | Oak |
| Grade | Mixed |
| Thickness | 18mm |
| Width | 150mm |
| Width Category | STANDARD (101mm-150mm) |
| Installation Method | Tongue & Groove |
| Length | 300mm-1200mm Mixed Length |
| Range | Edmonton |
| Pack Coverage | 1 pack covers 1.44 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Please note, an oiled finish isn't impermeable and might not be ideal for spill-prone areas
- The flooring has been finished with a brush to create a textured feel.
- Each pack contains boards of mixed lengths, offering a unique and dynamic installation pattern for a beautiful, natural-looking floor.
- This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
- This product uses a tongue and groove system, typically installed by gluing the planks together and fixing them to the sub-floor with the glue down method.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
Similar Products:
Customer Questions
- What tools do I need to install wood flooring?
What tools do I need to install wood flooring?
You’ll need basic DIY tools like a saw, tape measure, spacers, and mallet, plus specialist tools such as a tapping block and pull bar for a precise fit.
You Might Also Need:
