Fyfield Engineered Natural Oak Brushed and Oiled Click Lok 190mm x 15/4mm Wood Flooring

• Bedroom
• Dining Room
• Kitchen
• Living Room
• Hallway
• Home Office
• Conservatory
• Utility Room

190mm wide planks help reduce joins and create a more open floor layout

Brushed and oiled finish adds light texture while enhancing natural grain

Click Lok system allows faster, glue-free installation

Engineered multi-ply construction improves stability with temperature changes

15mm total thickness with 4mm solid oak wear layer for extended lifespan

The Fyfield Engineered Natural Oak Click Lok is a 15mm engineered oak floor with a 4mm wear layer, designed for straightforward installation without compromising on durability. It offers the look and feel of real oak, combined with a structure that handles everyday temperature and humidity changes more effectively than solid wood. It’s also suitable for use with water-based underfloor heating, which adds flexibility when planning your space.

Each board is 190mm wide, giving you a wider plank look that reduces visible joins across the floor. This helps create a cleaner, more continuous finish and can make rooms feel less crowded, particularly where narrower boards might look too busy.

The surface is brushed and oiled. Brushing lifts the grain slightly, so you get a subtle texture underfoot that feels closer to natural timber. The oiled finish enhances the oak’s natural tones while keeping the surface looking understated rather than heavily coated.

This is mixed grade oak, so expect natural knots, grain variation, and tonal differences across the boards. These features give the floor a more natural and less uniform appearance once installed. Boards are also supplied in mixed lengths, which helps avoid a repeated layout pattern.

The 4mm solid oak wear layer allows the floor to be sanded and refinished up to three times. In most homes, this won’t be something you need to consider for at least 10 to 15 years. The 15mm thickness, combined with the engineered core, provides a stable base that reduces movement over time.

Installation is where this floor stands out. The Click Lok system allows boards to be clicked together rather than glued, making the process quicker and more straightforward. It’s typically installed as a floating floor over a 3mm underlay, which helps with insulation and sound reduction. When fitting over water-based underfloor heating, a 4mm compressed rubber underlay is recommended, and the surface temperature should not exceed 27°C. A tapping block and rubber mallet can be used to ensure a tight, secure fit.

Because this is an oiled wood floor, the surface is not fully sealed. Spills should be wiped up promptly to prevent marking, and it’s not suitable for bathrooms or areas with standing water. The benefit of the oiled finish is that any worn or scratched sections can be repaired locally by sanding and re-oiling, rather than refinishing the entire floor.

When ordering, allow around 10% extra for wastage and cuts, plus an additional 5% to account for natural variation in grading.

We like the Fyfield Click Lok Natural Oak because it takes away some of the hassle of installation without changing how the floor looks or performs once it’s down. You still get the same natural oak finish and texture, but with a system that’s quicker to work with.

Chris, our Product Expert, recommends the Fyfield Click Lok because:

Pet Friendly: Natural grain and variation help soften the look of light scratches

Family Friendly: Mixed grade oak blends in everyday wear and small dents

Spill Resistant (with care): Oiled finish offers protection, but spills should be wiped promptly

Quicker Installation: Click Lok system reduces fitting time compared to traditional methods