Henley Engineered Grey Oak Matt Lacquered Click Lok **Prime** 207mm x 14/3mm Wood Flooring
Was
£43.49m²
Save £11.50m²
£31.99
m²£101.73 per pack
Prices Include VAT
£31.99㎡
inc. VAT
Product Code
RCLICKGREY1
Was
£43.49m²
Save £11.50m²
£31.99
m²£101.73 per pack
Prices Include VAT
Product Details
Product Code: RCLICKGREY1
Henley Engineered Grey Oak Matt Lacquered Click Lok **Prime** 207mm x 14/3mm Wood Flooring
A fantastic Grey Oak engineered wood flooring. Each individual board is 207mm (20.7cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Oak is prime, meaning it will contain few knots as is typical with prime Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Each pack may contain starter boards to allow you to stagger your layout.
A fantastic Grey Oak engineered wood flooring. Each individual board is 207mm (20.7cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Oak is prime, meaning it will contain few knots as is typical with prime Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Each pack may contain starter boards to allow you to stagger your layout.
Was
£43.49m²
Save £11.50m²
£31.99
m²£101.73 per pack
Prices Include VAT
| Product Code | RCLICKGREY1 |
|---|---|
| Finish | Matt Lacquered |
| Wood Species | Oak |
| Veneer | 3MM |
| Grade | PRIME |
| Thickness | 14mm |
| Wear Layer | 3mm |
| Width | 207mm |
| Width Category | EXTRA WIDE (201mm-290mm) |
| Installation Method | Click Lok System |
| Length | 2200MM |
| Range | Henley |
| Pack Coverage | 1 pack covers 3.18 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Each board has a 3mm layer of wood veneer that enables you to sand down and refinish the surface up to two times.
- Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
- Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Our 4mm Compressed Rubber Underlay is suitable for water based underfloor heating.
- Each board is manufactured with a click system profile, so each board can simply be clicked together. Manufacturer’s recommendation is to tap the planks on the edge with a tapping block and rubber mallet to make sure they are clicked tightly together.
- This engineered oak is typically installed as a floating floor with a 3mm underlay on the subfloor, providing protection from dampness and serving as a sound barrier and insulator.
- This prime grade product contains few knots, although there may be some as knots are typical in natural wood
- Each pack may contain starter boards to allow you to stagger your layout.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
Customer Questions
No Questions