Henley Engineered Natural Oak Brushed & Oiled 180mm x 20/6mm Wood Flooring
Was
£104.49m²
Save £64.50m²
£39.99
m²£68.38 per pack
Prices Include VAT
£39.99㎡
inc. VAT
Product Code
180206BO1
Was
£104.49m²
Save £64.50m²
£39.99
m²£68.38 per pack
Prices Include VAT
Product Details
Product Code: 180206BO1
Henley Engineered Natural Oak Brushed & Oiled 180mm x 20/6mm Wood Flooring
The Henley Engineered Natural Oak flooring features a brushed surface combined with an oiled finish, adding texture while enhancing the natural grain.
Each board measures 180mm (18cm) in width and 20mm in thickness, including a 6mm solid oak wear layer. This allows sanding and refinishing up to five times, although this is typically not required within the first 10–15 years.
Engineered construction helps reduce movement caused by temperature and humidity changes, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms and is compatible with water-based underfloor heating.
Installed as a floating floor with an underlay beneath for insulation and sound reduction. A 4mm compressed rubber underlay is suitable for underfloor heating.
As this is an oiled finish, care should be taken with spillages. Starter boards may be included.
Allow 10% extra for wastage and 5% for grading.
The Henley Engineered Natural Oak flooring features a brushed surface combined with an oiled finish, adding texture while enhancing the natural grain.
Each board measures 180mm (18cm) in width and 20mm in thickness, including a 6mm solid oak wear layer. This allows sanding and refinishing up to five times, although this is typically not required within the first 10–15 years.
Engineered construction helps reduce movement caused by temperature and humidity changes, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms and is compatible with water-based underfloor heating.
- Finish: Brushed and oiled, enhancing the grain while adding texture. The surface is not fully resistant to spillages
- Installation: Tongue and groove boards for glued installation
- Grading: Mixed grade oak with natural knots and variation
Installed as a floating floor with an underlay beneath for insulation and sound reduction. A 4mm compressed rubber underlay is suitable for underfloor heating.
As this is an oiled finish, care should be taken with spillages. Starter boards may be included.
Allow 10% extra for wastage and 5% for grading.
Was
£104.49m²
Save £64.50m²
£39.99
m²£68.38 per pack
Prices Include VAT
| Product Code | 180206BO1 |
|---|---|
| Finish | Brushed & Oiled |
| Wood Species | Oak |
| Veneer | 6mm |
| Grade | Mixed |
| Thickness | 20mm |
| Wear Layer | 6mm |
| Width | 180mm |
| Width Category | WIDE (151mm-200mm) |
| Installation Method | Tongue & Groove |
| Length | 1900mm |
| Range | Henley |
| Pack Coverage | 1 pack covers 1.71 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Each board has a 6mm layer of wood veneer that enables you to sand down and refinish the surface up to five times.
- The flooring has been finished with a brush to create a textured feel.
- Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
- Each board is manufactured with a tongue and groove profile, so each board can simply be glued together.
- This engineered oak is typically installed as a floating floor with a 5mm underlay on the subfloor, providing protection from dampness and serving as a sound barrier and insulator.
- This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
- Please note, an oiled finish isn't impermeable and might not be ideal for spill-prone areas
- Each pack may contain starter boards to allow you to stagger your layout.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
Similar Products:
Customer Questions
- What is engineered wood flooring?
- Do I need to acclimatise my wood flooring before fitting?
- Can I install wood flooring over underfloor heating?
- Do I need expansion gaps when fitting wood flooring?
- Can engineered wood flooring be sanded?
- Read 10 More Questions
What is engineered wood flooring?
Engineered wood is real wood on top, with stable layers beneath.
Do I need to acclimatise my wood flooring before fitting?
Yes, you must acclimatise your wood flooring before installation. For engineered wood, allow 48–72 hours; for solid wood, give it at least 7 days. Keep the packs flat, unopened, and in a room with stable conditions.
Can I install wood flooring over underfloor heating?
Yes, you can install wood flooring over underfloor heating—but it must be a water-based system. Never use electric underfloor heating with wood flooring, as it can overheat and damage the boards.
Do I need expansion gaps when fitting wood flooring?
Yes, always leave an expansion gap of 10–15mm around the perimeter of your wood flooring. This allows the wood to expand and contract naturally with changes in temperature and humidity.
Can engineered wood flooring be sanded?
Yes, engineered wood flooring can be sanded, but only if the top wear layer is thick enough—usually at least 3mm. Thinner layers may not allow for sanding without damage.
You Might Also Need:
