**** END OF LINE / JOB LOT **** Hillingdon Engineered Natural Oak Brushed & Lacquered 180mm x 20/6mm Wood Flooring (19 PACKS / 32.49m² / £1429.24)
Was
£104.49m²
Save £60.50m²
£43.99
m²Prices Include VAT
£43.99㎡
inc. VATWas
£104.49m²
Save £60.50m²
£43.99
m²Prices Include VAT
**** END OF LINE / JOB LOT ****
**** 19 PACKS / 32.49m² / £1429.24 ****
**** A SAVING OF £357.39 OFF OUR PREVIOUS SELLING PRICE ****
**** NO RETURNS ACCEPTED ****
A fantastic Natural Oak engineered wood flooring. Each individual board is 180mm (18cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator. Our 4mm Compressed Rubber Underlay is suitable for water based underfloor heating.
Each pack may contain starter boards to allow you to stagger your layout.
Industry standard for wastage and cut offs is 10%, with 5% for visual grading. This should be factored into your calculations when ordering.
**** END OF LINE / JOB LOT ****
**** 19 PACKS / 32.49m² / £1429.24 ****
**** A SAVING OF £357.39 OFF OUR PREVIOUS SELLING PRICE ****
**** NO RETURNS ACCEPTED ****
Was
£104.49m²
Save £60.50m²
£43.99
m²Prices Include VAT
| Product Code | 180206BL1 END OF LINE |
|---|---|
| Finish | Brushed & Lacquered |
| Wood Species | Oak |
| Veneer | 6mm |
| Grade | Mixed |
| Thickness | 20mm |
| Wear Layer | 6mm |
| Width | 180mm |
| Width Category | WIDE (151mm-200mm) |
| Installation Method | Tongue & Groove |
| Length | 1900mm |
| Range | Hillingdon |
| Pack Coverage | 1 pack covers 32.490 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Each board has a 6mm layer of wood veneer that enables you to sand down and refinish the surface up to five times.
- The flooring has been finished with a brush to create a textured feel.
- Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
- Each board is manufactured with a tongue and groove profile, so each board can simply be glued together.
- This engineered oak is typically installed as a floating floor with a 5mm underlay on the subfloor, providing protection from dampness and serving as a sound barrier and insulator.
- This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
- Each pack may contain starter boards to allow you to stagger your layout.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
