Hillingdon Engineered Natural Oak Oiled 150mm x 18/4mm Wood Flooring

• Bedroom
• Dining Room
• Kitchen
• Living Room
• Hallway
• Home Office
• Conservatory
• Utility Room

150mm wide planks offer a more traditional, balanced floor layout

Oiled finish enhances natural grain while keeping a low-sheen look

Engineered multi-ply construction improves stability with temperature changes

Tongue and groove system for secure glue-together installation

18mm total thickness with 4mm solid oak wear layer for long-term use

The Hillingdon Engineered Natural Oak is an 18mm engineered oak floor with a 4mm wear layer, designed for homes where you want a solid feel underfoot without going too wide in plank size. It strikes a balance between traditional styling and modern performance, with an engineered structure that helps reduce movement caused by changes in temperature and humidity. It’s also suitable for use with water-based underfloor heating, which makes it a flexible option across different rooms.

Each board is 150mm wide, giving a more classic plank layout compared to wider boards. This width creates a steady, even pattern across the floor, which works well if you prefer something that doesn’t draw too much attention but still looks considered.

The surface is oiled, which keeps the appearance closer to natural wood. There’s no heavy coating, so the grain and variation in the oak come through clearly. It also gives the floor a softer, more natural finish compared to lacquered alternatives.

This is mixed grade oak, so you’ll see knots, grain variation, and colour differences between boards. These natural features give the floor more character once installed, rather than a uniform or repeated look. Boards are supplied in mixed lengths, which helps create a more natural overall layout.

The 4mm solid oak wear layer allows the floor to be sanded and refinished up to three times. In most homes, this won’t be something you need to think about for at least 10 to 15 years. Combined with the 18mm thickness and engineered core, it provides a stable and durable structure over time.

Installation uses a tongue and groove system, with boards designed to be glued together. It’s typically installed as a floating floor over underlay, which helps improve insulation and reduce noise. A 3mm underlay is commonly used, while a 4mm compressed rubber underlay is recommended when installing over water-based underfloor heating, with a maximum surface temperature of 27°C.

Because this is an oiled wood floor, the surface is not fully sealed. Spills should be wiped up promptly to prevent marking, and it’s not suitable for bathrooms or areas where water can sit. The benefit is that any scratches or worn areas can be repaired locally by sanding and re-oiling, rather than refinishing the entire floor.

When ordering, allow around 10% extra for wastage and cuts, plus an additional 5% to account for natural variation in grading.

We like the Hillingdon Natural Oak Oiled because it’s a reliable, no-fuss option that doesn’t try to do too much. It feels solid, looks natural, and works in a wide range of spaces without dominating the room.

Richard, our Product Expert, recommends the Hillingdon because:

Pet Friendly: Natural grain helps soften the look of light scratches

Family Friendly: Mixed grade oak blends in everyday wear and small dents

Spill Resistant (with care): Oiled finish offers protection, but spills should be wiped promptly

Balanced Look: 150mm width suits both traditional and modern interiors