**** END OF LINE / JOB LOT **** (8 PACKS / 13.68m² / £533.38) Hillingdon Engineered Natural Oak Oiled 180mm x 20/6mm Wood Flooring
Was
£104.49m²
Save £65.50m²
£38.99
m²Prices Include VAT
£38.99㎡
inc. VATWas
£104.49m²
Save £65.50m²
£38.99
m²Prices Include VAT
**** END OF LINE / JOB LOT ****
**** 8 PACKS / 13.68m² / £533.38 ****
**** A SAVING OF £109.44 OFF OUR PREVIOUS SELLING PRICE ****
**** AN ADDITIONAL PART PACK WILL BE INCLUDED FREE OF CHARGE ****
**** NO RETURNS ACCEPTED ****
The Hillingdon Engineered Natural Oak flooring offers a classic natural oak look, finished with oil to enhance the grain and bring out the wood’s natural character.
Each board measures 180mm (18cm) in width and 20mm in thickness, including a 6mm solid oak wear layer. This thicker wear layer allows the floor to be sanded and refinished up to five times, although this is typically not required for the first 10–15 years in most homes.
Engineered construction helps reduce movement caused by temperature and humidity changes, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms and is compatible with water-based underfloor heating.
- Finish: Oiled, enhancing the natural grain. The surface is not fully resistant to spillages
- Installation: Tongue and groove boards for glued installation
- Grading: Mixed grade oak with natural knots and variation
Typically installed as a floating floor with an underlay to support insulation and sound reduction. A 4mm compressed rubber underlay is suitable for underfloor heating.
As this is an oiled finish, care should be taken with spillages. Starter boards may be included to help with layout.
Allow 10% extra for wastage and 5% for grading.
**** END OF LINE / JOB LOT ****
**** 8 PACKS / 13.68m² / £533.38 ****
**** A SAVING OF £109.44 OFF OUR PREVIOUS SELLING PRICE ****
**** AN ADDITIONAL PART PACK WILL BE INCLUDED FREE OF CHARGE ****
**** NO RETURNS ACCEPTED ****
Was
£104.49m²
Save £65.50m²
£38.99
m²Prices Include VAT
| Product Code | 180206OIL1 END OF LINE |
|---|---|
| Finish | Oiled |
| Wood Species | Oak |
| Veneer | 6mm |
| Grade | Mixed |
| Thickness | 20mm |
| Wear Layer | 6mm |
| Width | 180mm |
| Width Category | WIDE (151mm-200mm) |
| Installation Method | Tongue & Groove |
| Length | 1900mm |
| Range | Hillingdon |
| Pack Coverage | 1 pack covers 13.680 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Each board has a 6mm layer of wood veneer that enables you to sand down and refinish the surface up to five times.
- Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
- Each board is manufactured with a tongue and groove profile, so each board can simply be glued together.
- This engineered oak is typically installed as a floating floor with a 5mm underlay on the subfloor, providing protection from dampness and serving as a sound barrier and insulator.
- This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
- Please note, an oiled finish isn't impermeable and might not be ideal for spill-prone areas
- Each pack may contain starter boards to allow you to stagger your layout.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
