**** END OF LINE / JOB LOT **** (13 PACKS / 23.4m² / £842.17) Sawbury Engineered Whitewash Oak Brushed and Matt Lacquered Click Lok 150mm x 14/3mm Parquet Wood Flooring
Was
£91.99m²
Save £56.00m²
£35.99
m²Prices Include VAT
£35.99㎡
inc. VATWas
£91.99m²
Save £56.00m²
£35.99
m²Prices Include VAT
**** END OF LINE / JOB LOT ****
**** 13 PACKS / 23.4m² / £842.17 ****
**** A SAVING OF £642.79 OFF OUR PREVIOUS SELLING PRICE ****
**** NO RETURNS ACCEPTED ****
The Sawbury Engineered Whitewash Oak parquet flooring offers a lighter whitewashed oak look with a brushed texture and matt lacquered finish, making it a great choice for brightening interiors while still showing off the natural grain detail.
Each board measures 150mm (15cm) in width and 14mm (1.4cm) in overall thickness, including a 3mm oak wear layer. This wear layer means the surface can be sanded and refinished up to 2 times, helping the floor stay looking its best for longer.
- Finish: Brushed and matt lacquered to enhance the texture of the oak grain with a softer surface sheen
- Construction: Engineered parquet boards with a 3mm real oak wear layer
- Installation: Click Lok profile, with boards clicked together and typically bonded to the subfloor using a suitable adhesive
- Grading: Mixed grade, so some knots and natural variation will be present
This parquet flooring is highly stable and suitable for most rooms in the home, including conservatories, but should not be used in bathrooms. It can also be used with water based underfloor heating.
The brushed surface helps bring out the oak grain texture, while the matt lacquer provides a more natural-looking finish with added surface protection.
When ordering, allow 10% extra for wastage and cut-offs, plus an additional 5% for visual grading.
**** END OF LINE / JOB LOT ****
**** 13 PACKS / 23.4m² / £842.17 ****
**** A SAVING OF £642.79 OFF OUR PREVIOUS SELLING PRICE ****
**** NO RETURNS ACCEPTED ****
Was
£91.99m²
Save £56.00m²
£35.99
m²Prices Include VAT
| Product Code | PQWWBO1 END OF LINE |
|---|---|
| Finish | Brushed & Matt Lacquered |
| Wood Species | Oak |
| Veneer | 3mm |
| Grade | Mixed |
| Thickness | 14mm |
| Wear Layer | 3mm |
| Width | 150mm |
| Width Category | STANDARD (101mm-150mm) |
| Installation Method | Click Lok System |
| Length | 600mm |
| Range | Sawbury |
| Pack Coverage | 1 pack covers 23.400 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Each board has a 3mm layer of wood veneer that enables you to sand down and refinish the surface up to three times.
- The flooring has been finished with a brush to create a textured feel.
- Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
- Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem.
- Each board is manufactured with a click system profile, so each board can simply be clicked together. Manufacturer’s recommendation is to tap the planks on the edge with a tapping block and rubber mallet to make sure they are clicked tightly together.
- This Parquet Wood Floor would usually bonded to the sub-floor using an adhesive to provide a flexible and stable surface..
- This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
