Stockholm Engineered Natural Oak Lacquered 180mm x 20/6mm Wood Flooring
The Stockholm Engineered Natural Oak flooring features a clean natural oak tone, finished with lacquer to provide a smooth, protective surface.
Each board measures 180mm (18cm) in width and 20mm in thickness, including a 6mm solid oak wear layer. This allows sanding and refinishing up to five times, though this is typically not required within the first 10–15 years.
Engineered construction helps manage changes in temperature and humidity, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms and works with water-based underfloor heating.
Finish: Lacquered, offering a sealed surface for added protection
Installation: Tongue and groove boards for glued installation
Grading: Mixed grade oak with natural variation
Typically fitted as a floating floor with an underlay beneath to improve insulation and sound performance. A 4mm compressed rubber underlay is suitable with underfloor heating.
Starter boards may be included to assist with layout.
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
Each board has a 6mm layer of wood veneer that enables you to sand down and refinish the surface up to five times.
Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
Each board is manufactured with a tongue and groove profile, so each board can simply be glued together.
This engineered oak is typically installed as a floating floor with a 5mm underlay on the subfloor, providing protection from dampness and serving as a sound barrier and insulator.
This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
Each pack may contain starter boards to allow you to stagger your layout.
Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.