We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Sawbury Engineered Unfinished Oak **PRIME** 90mm x 18/4mm Parquet Wood Flooring
Product Code: PQ90PRUNF1
£83.97m² inc. VAT
£49.99
m² inc. VAT£49.99㎡
inc. VAT
Availability:
Out of stock
SKU
PQ90PRUNF1
£83.97m² inc. VAT
£49.99
m² inc. VAT- Buy over 30m² for £48.99m² and save 2%
- Buy over 60m² for £47.99m² and save 4%
- Buy over 90m² for £46.99m² and save 6%
- Buy over 120m² for £45.99m² and save 8%
- Buy over 150m² for £44.99m² and save 10%
Sawbury Engineered Unfinished Oak **PRIME** 90mm x 18/4mm Parquet Wood Flooring
A fantastic Unfinished Oak parquet wood flooring. Each individual board is 90mm (9cm), the overall thickness of the plank is 18mm (1.8cm), including a top 4mm layer of Oak veneer. The 4mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Parquet flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our parquet flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is prime, meaning it will contain few knots as is typical with prime Oak products.
This parquet Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Each pack may contain starter boards to allow you to stagger your layout.
A fantastic Unfinished Oak parquet wood flooring. Each individual board is 90mm (9cm), the overall thickness of the plank is 18mm (1.8cm), including a top 4mm layer of Oak veneer. The 4mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Parquet flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our parquet flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is prime, meaning it will contain few knots as is typical with prime Oak products.
This parquet Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Each pack may contain starter boards to allow you to stagger your layout.
£83.97m² inc. VAT
£49.99
m² inc. VAT| SKU | PQ90PRUNF1 |
|---|---|
| Wood Species | Oak |
| Finish | Unfinished |
| Veneer | 4MM |
| Grade | PRIME |
| Thickness | 18mm |
| Wear Layer | 4mm |
| width | 90mm |
| Width Category | NARROW (50mm-100mm) |
| Installation Method | Tongue & Groove |
| Length | 400MM |
| Range | Sawbury |
Write Your Own Review
Customer Questions