We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Toggle Nav
Search
CALL US
0333 002 0175
0333 002 0175
- Phone Lines Open 9am - 6pm Monday to Friday. Saturday 9am - 5pm. Sunday 10am - 4pm Warehouses - London - Leeds - Southampton - Cardiff - Coventry - Liverpool - Hartlepool - Livingston
Calder Engineered Natural Oak Brushed and Oiled 150mm x 10/2.5mm Wood Flooring
Product Code: 15010BO1
£35.99m² inc. VAT
£23.99
m² inc. VAT£23.99㎡
inc. VAT
Availability:
Out of stock
SKU
15010BO1
£35.99m² inc. VAT
£23.99
m² inc. VAT- Buy over 30m² for £23.69m² and save 1%
- Buy over 60m² for £23.39m² and save 3%
- Buy over 90m² for £23.09m² and save 4%
- Buy over 120m² for £22.79m² and save 5%
- Buy over 150m² for £22.49m² and save 6%
Calder Engineered Natural Oak Brushed and Oiled 150mm x 10/2.5mm Wood Flooring
A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 10mm (1cm), including a top 2.5mm layer of Oak veneer. The 2.5mm wear layer enables you to sand down and refinish the surface up to 1 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 10mm (1cm), including a top 2.5mm layer of Oak veneer. The 2.5mm wear layer enables you to sand down and refinish the surface up to 1 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
£35.99m² inc. VAT
£23.99
m² inc. VAT| SKU | 15010BO1 |
|---|---|
| Wood Species | Oak |
| Finish | Brushed and Oiled |
| Veneer | 2.5mm |
| Grade | MIXED |
| Thickness | 10mm |
| Wear Layer | 2.5mm |
| width | 150mm |
| Width Category | STANDARD (101MM-150MM) |
| Installation Service | Tongue & Groove |
| Length | 300-1200MM |
| Range | Calder |
Write Your Own Review
Customer Questions