Highgate Engineered Smoked Oak White Oiled and Distressed 220mm x 15/4mm Wood Flooring
Was
£94.49m²
Save £49.50m²
£44.99
m²£112.83 per pack
Prices Include VAT
£44.99㎡
inc. VAT
Product Code
220154SBWWD1
Was
£94.49m²
Save £49.50m²
£44.99
m²£112.83 per pack
Prices Include VAT
Product Details
Product Code: 220154SBWWD1
Highgate Engineered Smoked Oak White Oiled and Distressed 220mm x 15/4mm Wood Flooring
The Highgate Engineered Smoked Oak White Oiled and Distressed flooring features lighter tones with a textured, aged finish, giving the boards a more characterful and lived-in appearance.
Each board measures 220mm (22cm) in width, helping to create a more open and spacious feel, while the 15mm thickness includes a 4mm solid oak wear layer. This wear layer allows the floor to be sanded and refinished up to three times, although this is typically not required for the first 10–15 years in most domestic environments.
The engineered construction helps reduce movement caused by changes in temperature and humidity, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms. This flooring can also be used with water-based underfloor heating systems.
This flooring is typically installed as a floating floor, with a 3mm underlay laid beneath the boards. This helps protect against minor subfloor moisture while also improving sound insulation and heat retention. A 4mm compressed rubber underlay is suitable when installing over water-based underfloor heating.
As this is an oiled product, the surface is not impermeable, so care should be taken with spillages.
Each pack may include starter boards to help you stagger the layout for a more natural finish.
When ordering, allow 10% extra for wastage and cut-offs, plus an additional 5% to account for natural grading variation.
The Highgate Engineered Smoked Oak White Oiled and Distressed flooring features lighter tones with a textured, aged finish, giving the boards a more characterful and lived-in appearance.
Each board measures 220mm (22cm) in width, helping to create a more open and spacious feel, while the 15mm thickness includes a 4mm solid oak wear layer. This wear layer allows the floor to be sanded and refinished up to three times, although this is typically not required for the first 10–15 years in most domestic environments.
The engineered construction helps reduce movement caused by changes in temperature and humidity, making it suitable for most rooms in the home, including conservatories. It is not suitable for bathrooms. This flooring can also be used with water-based underfloor heating systems.
- Finish: White oiled and distressed, creating a textured surface with a more aged appearance. The oil enhances the grain but is not fully resistant to spillages
- Construction: Engineered design to improve stability in changing conditions
- Installation: Tongue and groove boards, designed to be glued together and typically fitted as a floating floor
- Grading: Mixed grade oak, so natural knots and variation will be visible
This flooring is typically installed as a floating floor, with a 3mm underlay laid beneath the boards. This helps protect against minor subfloor moisture while also improving sound insulation and heat retention. A 4mm compressed rubber underlay is suitable when installing over water-based underfloor heating.
As this is an oiled product, the surface is not impermeable, so care should be taken with spillages.
Each pack may include starter boards to help you stagger the layout for a more natural finish.
When ordering, allow 10% extra for wastage and cut-offs, plus an additional 5% to account for natural grading variation.
Was
£94.49m²
Save £49.50m²
£44.99
m²£112.83 per pack
Prices Include VAT
| Product Code | 220154SBWWD1 |
|---|---|
| Finish | Oiled & Distressed |
| Wood Species | Oak |
| Veneer | 4mm |
| Grade | Mixed |
| Thickness | 15mm |
| Wear Layer | 4mm |
| Width | 220mm |
| Width Category | EXTRA WIDE (201mm-290mm) |
| Installation Method | Tongue & Groove |
| Length | 1900mm |
| Range | Highgate |
| Pack Coverage | 1 pack covers 2.508 m² |
Ask the Experts - Product and Fitting Tips
With our many years of experience in the flooring industry, we know that proper installation is the key to achieving a beautiful and long-lasting finish. Whether you’re taking on a DIY project or hiring a professional, following expert advice will help ensure your new floors are installed perfectly. Check out our top installation tips below to get started on the right foot!
For even more flooring tips and advice, be sure to visit our Customer Questions and Help Centre!
- Each board has a 4mm layer of wood veneer that enables you to sand down and refinish the surface up to three times.
- Engineered wood flooring like this is very resilient to temperature and humidity changes, making it suitable for most rooms, including conservatories. The only exception is the bathroom.
- Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Our 4mm Compressed Rubber Underlay is suitable for water based underfloor heating.
- Each board is manufactured with a tongue and groove profile, so each board can simply be glued together.
- This engineered oak is typically installed as a floating floor with a 3mm underlay on the subfloor, providing protection from dampness and serving as a sound barrier and insulator.
- This product has a mixed grade, so it will contain some knots, which is typical for natural wood.
- Please note, an oiled finish isn't impermeable and might not be ideal for spill-prone areas
- Each pack may contain starter boards to allow you to stagger your layout.
- Please keep in mind that the industry standard includes 10% for wastage and cut-offs, and 5% for visual grading. Make sure to factor this into your calculations when ordering.
Similar Products:
Customer Questions
- What is engineered wood flooring?
- Do I need to acclimatise my wood flooring before fitting?
- Can I install wood flooring over underfloor heating?
- Do I need expansion gaps when fitting wood flooring?
- Can engineered wood flooring be sanded?
- Read 10 More Questions
What is engineered wood flooring?
Engineered wood is real wood on top, with stable layers beneath.
Do I need to acclimatise my wood flooring before fitting?
Yes, you must acclimatise your wood flooring before installation. For engineered wood, allow 48–72 hours; for solid wood, give it at least 7 days. Keep the packs flat, unopened, and in a room with stable conditions.
Can I install wood flooring over underfloor heating?
Yes, you can install wood flooring over underfloor heating—but it must be a water-based system. Never use electric underfloor heating with wood flooring, as it can overheat and damage the boards.
Do I need expansion gaps when fitting wood flooring?
Yes, always leave an expansion gap of 10–15mm around the perimeter of your wood flooring. This allows the wood to expand and contract naturally with changes in temperature and humidity.
Can engineered wood flooring be sanded?
Yes, engineered wood flooring can be sanded, but only if the top wear layer is thick enough—usually at least 3mm. Thinner layers may not allow for sanding without damage.
You Might Also Need:
