Sawbury Engineered Unfinished Oak **PRIME** 70mm x 18/4mm Parquet Wood Flooring
A fantastic Unfinished Oak parquet wood flooring. Each individual board is 70mm (7cm), the overall thickness of the plank is 18mm (1.8cm), including a top 4mm layer of Oak veneer. The 4mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Parquet flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our parquet flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is prime, meaning it will contain few knots as is typical with prime Oak products.
This parquet Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Each pack may contain starter boards to allow you to stagger your layout.