Dreaming of a stylish new floor without the hassle or high cost of professional fitting? You’re in the right place. With its clever interlocking design and ease of use, Click Lok vinyl flooring is one of the best options for a DIY-friendly transformation.
Perfect for bedrooms, living rooms, hallways, and even kitchens, Click Lok vinyl is durable, water-resistant, and available in a wide range of styles, colours, and finishes — from natural wood-look planks to statement herringbone patterns.
In this guide, we’ll walk you through everything you need to know to install your own Click Lok vinyl flooring — with confidence and style.
What Is Click Lok Vinyl Flooring?
Click Lok flooring uses a simple interlocking mechanism that allows each vinyl plank or tile to slot securely into place — no glue, nails, or specialist tools required. It’s designed to “float” over your subfloor, making it ideal for DIYers looking to save time and cost.
Benefits of Click Lok Installation:
-
Fast and simple to fit
-
Can be laid over most existing floors
-
Easy to replace individual planks if needed
-
Great for rented homes or temporary projects
-
Compatible with water based underfloor heating
Whether you're fitting a new grey herringbone, smoked plank, or textured wood-look vinyl, Click Lok makes it easier than ever.
What You’ll Need
Before you begin, make sure you have the following tools and materials:
Tools:
-
Utility knife or vinyl cutter
-
Spacers (for expansion gap)
-
Tape measure
-
Straight edge or ruler
-
Rubber mallet (optional but helpful)
-
Soft brush or vacuum
-
Underlay (if recommended by manufacturer)
Materials:
-
Your chosen Click Lok vinyl flooring
-
Trim and threshold bars
-
Moisture barrier (if required on certain subfloors)
Step-by-Step Installation Guide
Step 1: Prepare Your Subfloor
Your subfloor needs to be clean, dry, and level.
-
Remove any old carpet or damaged flooring
-
Sweep and vacuum thoroughly
-
Check for uneven areas and use a self-levelling compound if needed
Tip: Click Lok vinyl can be installed over existing hard floors like tile or laminate, as long as they’re flat.
Step 2: Acclimatise Your Flooring
Let the vinyl planks or tiles rest in the room for at least 24–48 hours before fitting. This helps them adjust to the room’s temperature and humidity.
Keep the packs flat and unopened during this time.
Step 3: Plan Your Layout
Before you start clicking the planks together, take time to plan:
-
Measure the room and mark the centre
-
Decide on your plank direction (typically parallel to the longest wall)
-
Lay out a few rows to check the pattern and fit
Tip: If you're installing herringbone vinyl flooring, it’s even more important to pre-plan your pattern carefully.
Step 4: Install the First Row
Start in a corner, placing spacers along the wall to allow for a 10mm expansion gap.
-
Place the first plank with the tongue edge facing the wall
-
Connect the second plank by angling it into the first and clicking it down
-
Continue along the wall, cutting the last plank to fit if needed
Use a straight edge and utility knife to score and snap planks to length.
Step 5: Build the Rest of the Floor
Begin the next row with the offcut from the previous row (at least 20cm in length to maintain a staggered effect).
-
Insert the long edge into the previous row at an angle
-
Press down gently to click it into place
-
Use a rubber mallet and tapping block if needed for a snug fit
Continue row by row, making sure your joints are tight and aligned.
Step 6: Finishing Touches
Once the floor is fully laid:
-
Remove spacers
-
Fit scotia or skirting to cover the expansion gap
-
Install threshold bars at doorways
-
Give the floor a final sweep or vacuum
Avoid walking on the floor for a couple of hours to let everything settle.
Caring for Your New Click Lok Floor
Vinyl flooring is wonderfully low maintenance. To keep your new floor looking beautiful:
-
Sweep or vacuum regularly
-
Mop with a damp cloth and a vinyl-safe cleaner
-
Avoid harsh chemicals or abrasive tools
-
Use felt pads under furniture legs to prevent scratches
Textured finishes are especially good in busy rooms, helping to disguise small marks or daily wear.
Where Can You Use Click Lok Vinyl?
This versatile flooring is suitable for nearly every room in the house, including:
-
Living rooms – stylish and soft underfoot
-
Bedrooms – quiet, warm, and easy to clean
-
Hallways – durable enough for high foot traffic
-
Kitchens – water-resistant and easy to mop
Available in 4mm, 4.2mm, and 5mm thicknesses, Click Lok flooring provides comfort, noise reduction, and warmth underfoot — ideal for busy homes with kids or pets.
Final Thoughts
If you're looking for a budget-friendly, stylish, and durable flooring solution you can install yourself, Click Lok vinyl flooring is the perfect choice. It’s easy to lay, comfortable to live with, and available in a wide variety of plank and herringbone styles to suit your space.
Whether you’re fitting natural wood tones, a sleek grey finish, or a rich coffee colour, Click Lok makes your next home project not just possible — but enjoyable.
Explore more at Flooring365.co.uk to find your perfect Click Lok vinyl floor and transform your home with ease and confidence.
